Solved: Three Top Lennox iComfort Thermostat Error Codes

When something’s messing with your HVAC system, one of the first places to look is your thermostat. Many models have a digital display that will reveal a specific numerical error code. This error code can be used to help diagnose the problem and streamline the troubleshooting and repair process for HVAC systems like your furnace.

This is even easier with smart thermostats like the Lennox iComfort model. Let’s review three serious error codes—411, 225 and 31—to find out what the problem is. We’ll also share what steps your technician will take to repair the problem, and the potential costs to do so.

Lennox Thermostat iComfort Error Code 411

Error code 411 is an urgent priority to resolve. You’ll see this error code appear when the outdoor unit’s low-pressure switch malfunctions five times or more during one heating or cooling cycle. Since this error code includes the outdoor unit, it may be involved with your air conditioner. Every time the low-pressure switch opens incorrectly, the error count increases. Once it passes five strikes, the thermostat immediately switches down the outdoor unit. This is known as a lockout and is a safety feature designed to prevent damage.

Fixing the Problem

A technician will check the system charge using several methods, as the issue may be with the switch’s power connections rather than the low-pressure switch itself. Once the cause has been uncovered, technicians will reset the outdoor unit by placing it in test mode or by resetting low-voltage power. Once the issue is resolved, the error code should automatically clear.

Estimated Repair Cost

Swapping out a low-pressure shutoff switch can depend on the specific model of your outdoor unit. You may expect to pay between $200 to more than $600 depending on parts and air conditioning repair costs. The shutoff switch itself costs an average of $30 to $150.

Solved: iComfort Error Code 225

Error code 225 is specific to your furnace, particularly the high-pressure switch. This switch is a safety feature that releases excess pressure inside the furnace, such as when airflow is blocked. When this error code shows up, it means the pressure switch will not close. Without consistent airflow and pressure, the furnace won’t work as efficiently.

Fixing the Problem

The technician will check the high-pressure switch to see how it functions. They’ll measure the pressure while it attempts to close during a heating cycle as well as its general operating pressure. If they find a problem, an obstruction impacting airflow is the most common culprit. There are a few places to check, such as the vent and combustion air inducer. Technicians will inspect both these components as well as the condensate drain to find the blockage.

Estimated Repair Cost

Because there are multiple places to check before an obstruction can be found, labor costs should be considered when fixing error code 225. Ultimately, the total cost of this furnace repair will depend on where the problem is located as well as how long it takes the technician to identify the source.

Solved: iComfort Error Code 31

Seeing error code 31 on your thermostat means it hasn’t been able to communicate with your furnace for more than three minutes. Multiple components communicate with the thermostat, so you can find this error code when any of them malfunction or fail. Most of the time this can be traced back to an electrical issue, like old wiring or a loose connection.

Fixing the Problem

A technician can take a look at all the connections and wiring of the communicating components of your furnace. They will test voltages and wiring ohms since especially high resistance can lead to a disconnection. With a special tool called a multimeter, technicians can narrow down where the disruption originated from. Sometimes this is the furnace’s float switch, a component that shuts off the furnace when the condensate drain pan is too full.

Estimated Repair Cost

With multiple potential causes, it may be difficult to gauge the total repair costs of error code 31. Technicians will check the float switch to rule it out before thoroughly reviewing electrical wiring and connections. If the cause is damage or a failed component, replacement part costs should be included. You may expect to spend anywhere from $200 to more than $800 for higher-range models.